Skip to main content

Introduction

'''

How to change the fuel filter on a Citroën C5 (X7) Saloon 2.0 BlueHDi 16V FAP Hydractive 150

Video Overview

  1. 
Start by removing the engine cover by pulling on it.

Start by removing the engine cover by pulling on it.

Start by removing the engine cover by pulling on it.
    • Start by removing the engine cover by pulling on it.

  2. 
Loosen the clamp on the first air hose using a 7 mm socket.

Loosen the second air hose clamp using a pair of multi-grip pliers.

Remove the air outlet hose by pulling on it.
    • Loosen the clamp on the first air hose using a 7 mm socket.

    • Loosen the second air hose clamp using a pair of multi-grip pliers.

    • Remove the air outlet hose by pulling on it.

  3. 
Unscrew the screw from the second air hose bracket using a 10 socket wrench.

Remove the screw from its location.

Remove the screw from its location.
    • Unscrew the screw from the second air hose bracket using a 10 socket wrench.

    • Remove the screw from its location.

  4. 
Unclip the air outlet hose

Pull the air hose out of its location

Pull the air hose out of its location
    • Unclip the air outlet hose

    • Pull the air hose out of its location

  5. 
Unscrew the air box screws using a T Torx 25 screwdriver

Disconnect the air box probe.

Disconnect the air box probe.
    • Unscrew the air box screws using a T Torx 25 screwdriver

    • Disconnect the air box probe.

  6. 
Remove the air box cover by pulling on it.

Remove the air box cover by pulling on it.
    • Remove the air box cover by pulling on it.

  7. 
Locate the fuel filter.
    • Locate the fuel filter.

  8. 
Disconnect the heater power plug

Disconnect the heater power plug
    • Disconnect the heater power plug

  9. 
Unscrew the fuel hose from the filter.

Using a flat-head screwdriver, remove the brake vacuum hose, located at the rear of the filter.

Using a flat-head screwdriver, remove the brake vacuum hose, located at the rear of the filter.
    • Unscrew the fuel hose from the filter.

    • Using a flat-head screwdriver, remove the brake vacuum hose, located at the rear of the filter.

  10. 
Unlock the filter by pressing the button while lifting the filter

Disconnect the connector

Disconnect the connector
    • Unlock the filter by pressing the button while lifting the filter

    • Disconnect the connector

  11. 
Disconnect the drain hose

Remove the fuel filter.
    • Disconnect the drain hose

    • Remove the fuel filter.

  12. 
Compare the dimensions of the new filter with the old one (dimensions, number of hoses and location of the heater).

Compare the dimensions of the new filter with the old one (dimensions, number of hoses and location of the heater).
    • Compare the dimensions of the new filter with the old one (dimensions, number of hoses and location of the heater).

  13. 
Using a flat screwdriver, remove the heater from the old filter.

Using a flat screwdriver, remove the heater from the old filter.

Using a flat screwdriver, remove the heater from the old filter.
    • Using a flat screwdriver, remove the heater from the old filter.

  14. 
Using a flat screwdriver, remove the two heater gaskets.

Replace the two old gaskets with two new ones.

Replace the two old gaskets with two new ones.
    • Using a flat screwdriver, remove the two heater gaskets.

    • Replace the two old gaskets with two new ones.

  15. 
Lubricate the new seals with oil

Replace the heater on the fuel filter.

Replace the heater on the fuel filter.
    • Lubricate the new seals with oil

    • Replace the heater on the fuel filter.

  16. 
Remove the fuel filter cap.

Remove the fuel filter cap.
    • Remove the fuel filter cap.

  17. 
Connect the drain hose

Plug the connector into its slot.

Plug the connector into its slot.
    • Connect the drain hose

    • Plug the connector into its slot.

  18. 
Replace the brake vacuum hose.

Replace the brake vacuum hose.
    • Replace the brake vacuum hose.

  19. 
Reconnect the fuel hose.

Reconnect the power plug.
    • Reconnect the fuel hose.

    • Reconnect the power plug.

  20. 
Reposition the air box cover by engaging the clips on the rear section.

Tighten the case screws with a 25 Torx

Tighten the case screws with a 25 Torx
    • Reposition the air box cover by engaging the clips on the rear section.

    • Tighten the case screws with a 25 Torx

  21. 
Reconnect the probe to the air box cover

Reconnect the probe to the air box cover
    • Reconnect the probe to the air box cover

  22. 
Reposition the air inlet hose in its location.
    • Reposition the air inlet hose in its location.

  23. 
Tighten the air inlet hose clamp using a pair of multi-grip pliers

Tighten the air hose clamp with a 7mm socket.
    • Tighten the air inlet hose clamp using a pair of multi-grip pliers

    • Tighten the air hose clamp with a 7mm socket.

  24. 
Replace the second air hose in its location.

Replace the second air hose in its location.

Replace the second air hose in its location.
    • Replace the second air hose in its location.

  25. 
Tighten the hose support screw with a 10 socket.

Tighten the hose support screw with a 10 socket.
    • Tighten the hose support screw with a 10 socket.

  26. 
Reposition the engine cover.

Reposition the engine cover.

Reposition the engine cover.
    • Reposition the engine cover.

Finish Line

Nicolas L

Member since: 2/6/19

628 Reputation

4 Guides authored

Team

Oscaro Team Member of Oscaro Team

4 Members

101 Guides authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 1

Past 7 Days: 17

Past 30 Days: 48

All Time: 3,171