Skip to main content

Introduction

Vehicle engine: Peugeot 306 II 1.6 i 90cv

Video Overview

  1. 
Open the driver's side door

Pull the crank located under the steering wheel

Open the hood
    • Open the driver's side door

    • Pull the crank located under the steering wheel

    • Open the hood

  2. 
Loosen the air filter housing clamp

Take off the collector

Take off the collector
    • Loosen the air filter housing clamp

    • Take off the collector

  3. 
Unclip the oil vapor hose (be careful, the pipe is fragile).

Unclip the oil vapor hose (be careful, the pipe is fragile).

Unclip the oil vapor hose (be careful, the pipe is fragile).
    • Unclip the oil vapor hose (be careful, the pipe is fragile).

  4. 
Unclip the two clips on the air box cover

Release the tabs from the cover by sliding the cover gently.

Release the tabs from the cover by sliding the cover gently.
    • Unclip the two clips on the air box cover

    • Release the tabs from the cover by sliding the cover gently.

  5. 
Remove the air box cover and take the air filter out of its location

Compare the dimensions between the old and le nouveau filtre à air (shapes, dimensions)

Compare the dimensions between the old and le nouveau filtre à air (shapes, dimensions)
    • Remove the air box cover and take the air filter out of its location

    • Compare the dimensions between the old and le nouveau filtre à air (shapes, dimensions)

  6. 
Clean the air box with a blower to remove all impurities.

Reposition the new air filter in its location

Replace the air box cover by inserting the lugs
    • Clean the air box with a blower to remove all impurities.

    • Reposition the new air filter in its location

    • Replace the air box cover by inserting the lugs

  7. 
Replace the intake manifold with the air box.

Re-clip the two air box clips

Re-clip the two air box clips
    • Replace the intake manifold with the air box.

    • Re-clip the two air box clips

  8. 
Reclip the oil vapor hose

Tighten the air filter housing clamp with un tournevis plat

Tighten the air filter housing clamp with un tournevis plat
    • Reclip the oil vapor hose

    • Tighten the air filter housing clamp with un tournevis plat

Finish Line

thibaut.ansaldi

Member since: 11/23/14

84,142 Reputation

196 Guides authored

Team

Oscaro Team Member of Oscaro Team

4 Members

101 Guides authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 2,198