Change the air filter on Peugeot 207 phase 2

You want to change your air filter on 207 phase 2 ( after year 2009 ), this tutorial will help you do it quickly.

Open your hood with the hatch located below the steering wheel on the left side.

Your air filter is located on the left side of the brake fluid reservoir

Once the air filter cover is located , you can now see that there is 3 screws that hold this one.

Use a Torx 25 screwdriver to be able to remove the screws , these remain on the air filter cover support, do not try to remove them by force.

When the 3 screws are unscrewed, you will find on the right side of the cover a small metal clip . You can remove it with your finger by simply sliding it to the right side without forcing.

The clip is therefore removed and on the side to be able to follow the following steps.

You can now lift the air box cover upwards so that you can then pull towards you to remove it completely.

The air filter is now visible .

You can now remove the air filter by lifting it upwards .

Replace the new air filter in respecting its meaning while placing the seal on the right side of it.

For my part, I simply vacuumed the air filter because it is almost new.

You can now replace the air box cover respecting its direction, press it hard once in place to put it in place properly.

Now take the metal clip that is on the right side of the air box then force it to put it on the air box so that it is well placed in its support.

If you have difficulty, help yourself by pressing on the air box during the manipulation.

You can now screw in the 3 available screws on the air box support cover.

With your Torx 25 screwdriver , do not force the screws too much to avoid damaging the plastic and the screw thread.

This tutorial will help you change your air filter easily and quickly with precise explanations.