Skip to main content

Introduction

How to change the air filter on Peugeot 2008 - 1.2 THP

Video Overview

  1. 
Open the hood

Pull the engine cover upwards to remove it

Pull the engine cover upwards to remove it
    • Open the hood

    • Pull the engine cover upwards to remove it

  2. 
Press the hose tab with a small screwdriver

and pull on it to remove it

and pull on it to remove it
    • Press the hose tab with a small screwdriver

    • and pull on it to remove it

  3. 
Unclip the clip on the air intake hose and move the vacuum pipe

Unclip the clip on the air intake hose and move the vacuum pipe

Unclip the clip on the air intake hose and move the vacuum pipe
    • Unclip the clip on the air intake hose and move the vacuum pipe

  4. 
Disconnect the air box hose by pulling on it

Disconnect the air box hose by pulling on it

Disconnect the air box hose by pulling on it
    • Disconnect the air box hose by pulling on it

  5. 
Loosen the two screws on the air box without removing them with a pawl and one Torx T25 bit

Loosen the two screws on the air box without removing them with a pawl and one Torx T25 bit

Loosen the two screws on the air box without removing them with a pawl and one Torx T25 bit
    • Loosen the two screws on the air box without removing them with a pawl and one Torx T25 bit

  6. 
Release the clip on the left side of the air box

Release the clip on the left side of the air box

Release the clip on the left side of the air box
    • Release the clip on the left side of the air box

  7. 
Lift the air box cover

Then pull on it to put it down

Then pull on it to put it down
    • Lift the air box cover

    • Then pull on it to put it down

  8. 
Remove the air filter from its box by pulling it upwards.

Remove the air filter from its box by pulling it upwards.

Remove the air filter from its box by pulling it upwards.
    • Remove the air filter from its box by pulling it upwards.

  9. 
Pull the filter foam in the bottom of the air box to remove it

Pull the filter foam in the bottom of the air box to remove it

Pull the filter foam in the bottom of the air box to remove it
    • Pull the filter foam in the bottom of the air box to remove it

  10. 
Compare the dimensions of the new filter with the old one, thickness, width and length

Compare the dimensions of the filter foam with the old one

Compare the dimensions of the filter foam with the old one
    • Compare the dimensions of the new filter with the old one, thickness, width and length

    • Compare the dimensions of the filter foam with the old one

  11. 
Place the foam back in its housing, placing it firmly at the bottom

Place the foam back in its housing, placing it firmly at the bottom

Place the foam back in its housing, placing it firmly at the bottom
    • Place the foam back in its housing, placing it firmly at the bottom

  12. 
Replace the new filter in the air box

Replace the new filter in the air box

Replace the new filter in the air box
    • Replace the new filter in the air box

  13. 
The air box cover has two guides to be placed in the bottom of the air box

Place the cover by fitting the two guides

Place the cover by fitting the two guides
    • The air box cover has two guides to be placed in the bottom of the air box

    • Place the cover by fitting the two guides

  14. 
Close the lid

Close the clip on the side of the air box by pushing on it

Close the clip on the side of the air box by pushing on it
    • Close the lid

    • Close the clip on the side of the air box by pushing on it

  15. 
Tighten the two air box screws with the pawl And the Torx T25 bit

Tighten the two air box screws with the pawl And the Torx T25 bit
    • Tighten the two air box screws with the pawl And the Torx T25 bit

  16. 
Fit the air intake hose onto the air box

Fit the air intake hose onto the air box

Fit the air intake hose onto the air box
    • Fit the air intake hose onto the air box

  17. 
Open the clip on the hose

Place the vacuum hose in the clip

And close the clip
    • Open the clip on the hose

    • Place the vacuum hose in the clip

    • And close the clip

  18. 
Place the engine cover on the 3 guides and the clip on the hose

Place the engine cover on the 3 guides and the clip on the hose

Place the engine cover on the 3 guides and the clip on the hose
    • Place the engine cover on the 3 guides and the clip on the hose

Finish Line

2 other people completed this guide.

dylan.leviavant

Member since: 12/06/2016

527,102 Reputation

94 Guides authored

Team

Oscaro Team Member of Oscaro Team

4 Members

101 Guides authored

One Comment

Hello, do you know where I can pick up a suitable ratchet and aTorx T25 bit to do this operation? Sometimes there are problems with adapters or connectors that are too long. Thanks in advance.

freerideratco - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 17

Past 30 Days: 69

All Time: 3,194