Introduction
This tutorial explains how to change the air filter on a Hyundai i30 1.6 CRDi 16V 115 hp
Tools
Parts
-
-
To be able to Recognize your air filter on Hyundai i30 you will first have to open your hood thanks to the controller inside the car pulling towards you.
-
The air filter this found on the right by opening your hood, above the battery.
-
-
-
On the air box you will find 4 clips that can be removed by hand by pulling on it, 2 in front, 1 on the left side and 1 behind on the right side.
-
For remove the clips you will simply have to pull towards you.
-
-
-
Once the 4 clips remove, you will have to gently lifted the air box in going from right to left to be able to take it off.
-
Grab the air filter which is inside then pull it out upwards. -
Remember to clean your air box and remove any residue inside.
-
-
-
Replace the air filter in respecting its meaning, press it firmly so that it is firmly seated at the bottom. -
Then you will have to put the air box back in place above in the putting the clips back in front and pressing them firmly.
-
-
-
For good put the air box back you will need to make sure it is seated properly Then Replace the 4 clips by pushing them towards the air box.
-
Reminder : You have 4 clips to put back, 2 on the front part, 1 on the left part and 1 on the back right side of the air box.
-
Cancel: I did not complete this guide.
One other person completed this guide.
One Comment
Thank you for this tutorial which, although dealing with a subject that some people would find very simple, allows hesitant people to be able to go there without asking questions.
nicolas bertrand - Resolved on Release Reply
