Parts
Video Overview
-
-
Open the door
-
Pull the crank located under the steering wheel at the bottom left
-
Open the hood
-
-
-
Unscrew the pressure sensor screw with the 10 socket wrench and remove it.
-
Place the pressure sensor on the side
-
-
-
Remove the air box by pulling upwards, taking care to remove the air hose
-
-
-
Unscrew the first 2 screws of the air box cover with the Torx T30 screwdriver
-
-
-
Unscrew the other two screws on the air box cover with the Torx T30 screwdriver
-
-
-
Compare the dimensions (length, width) between the old and new air filter
-
-
-
Reinstall the new air filter in the air box
-
Make sure the air filter is correctly positioned
-
Replace the cover on the air box
-
-
-
Screw the 4 screws of the cover on the air box with the Torx T30 screwdriver
-
-
-
Tighten the screw holding the pressure sensor
-
Tighten the air hose clamp screw
-
Reconnect the flow meter
-
Cancel: I did not complete this guide.
2 other people completed this guide.