Skip to main content

Introduction

tutorial made on a Renault Clio 4 petrol 0.9 Tce 90

  1. 
First, pull the hood tab next to the clutch pedal towards you to open the hood.

Once the tab is pulled, go to the front of the car. To the right of the Renault sign is the second tab to open the hood, put your fingers and push it to your left and the hood opens.

Once the tab is pulled, go to the front of the car. To the right of the Renault sign is the second tab to open the hood, put your fingers and push it to your left and the hood opens.
    • First, pull the hood tab next to the clutch pedal towards you to open the hood.

    • Once the tab is pulled, go to the front of the car. To the right of the Renault sign is the second tab to open the hood, put your fingers and push it to your left and the hood opens.

  2. 
The air filter is located in this tank

On either side of the tray there is a tab that you have to fold back using your fingers (I'll give you the photo in the next step) to remove this tray.

On either side of the tray there is a tab that you have to fold back using your fingers (I'll give you the photo in the next step) to remove this tray.
    • The air filter is located in this tank

    • On either side of the tray there is a tab that you have to fold back using your fingers (I'll give you the photo in the next step) to remove this tray.

  3. 
Once the tabs are removed, the tray comes out easily.

Once the tabs are removed, the tray comes out easily.

Once the tabs are removed, the tray comes out easily.
    • Once the tabs are removed, the tray comes out easily.

  4. 
Don't forget to compare the new air filter and the old one
  5. 
Take advantage of this if you have a compressor to blow the tank. If you are not equipped, try to remove as much dirt as possible from the tank using a vacuum cleaner, cloth, etc.

A poor air filter increases the car's consumption and can affect the vehicle's power.
    • Take advantage of this if you have a compressor to blow the tank. If you are not equipped, try to remove as much dirt as possible from the tank using a vacuum cleaner, cloth, etc.

    • A poor air filter increases the car's consumption and can affect the vehicle's power.

    • The condition of my air filter really leaves something to be desired, it was time for me to change it! Here is this tutorial finished to reassemble do the steps in reverse order

Finish Line

9 other people completed this guide.

Abdallah Gottai

Member since: 04/19/2017

305 Reputation

2 Guides authored

3 Comments

Hello

Same manipulation for the 1.5 DCI. On the other hand, avoid the blower which will send dirt into the conduits towards the intake!!! Use a VACUUM CLEANER. Good luck to ALL.

Lucien DUCROS - Reply

Hello, which engine is this tutorial valid for?

Etienne TCHALIKIAN - Reply

essence 0.9 Tce 90

Christophe Riffard -

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 24

Past 30 Days: 124

All Time: 11,162