Difficulty
Easy
Steps
6
Time Required
00:15:00
- Change tail light on Audi 80 6 steps
Ce tutoriel a été créé par la communauté
User contributed
Introduction
In this tutorial we will see how to replace a right rear light of an Audi 80 Avant:
-Access the taillight
-put it down
-install the new light
Tools
Parts
-
-
After opening the trunk, remove the cover on the right. Using the handle.
-
-
-
Insert the 8mm socket wrench into the 4 holes and unscrew.
-
2nd photo: right side
-
3rd photo left side
-
-
-
Once the 4 fasteners (8mm nut) are unscrewed. Turn the support wheel counterclockwise.
-
Remove the support
-
-
-
From the outside pull the fire towards you.
-
Then clean the surface of the seal using a cloth.
-
-
-
Take the new fire out of its packaging
-
Position the tail light on the car
-
Tighten the fasteners using the 8mm socket wrench
-
Reassemble the bulb holder by turning it clockwise to lock it.
-
Reposition the trunk cover
-
Close the trunk
-
