Change rear window wiper motor on Clio 2

Unscrew the screw to the right of the hand grip.

Then pull the plastic protection towards you.

It is held in place by small clips which will gradually come off or break, depending on the age of the car...!

Lift the plastic that protects the windshield wiper screw

Unscrew the nut to remove the windshield wiper

Use a little oil if the nut or wiper is seized!

Then remove the plastic cover by passing a screwdriver between the cover and the glass. It is just clipped on.

The cover removed reveals a nut.

Unscrew it and keep the seal which is just behind.

Remove power supply (in blue)

Remove the 3 screws holding the motor

Remove the motor from its housing

Once the engine is removed, simply put the new one in, then repeat the operations in reverse order.