Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Change fuel filter on Peugeot 2008 - 1.6 HDi

Written By: dlychar (and 2 other contributors)
  • Comments: 14
  • Favorites: 0
  • Completions: 13

Difficulty

Moderate

Steps

9

Time Required

00:15:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

Tutorial made on Peugeot 2008 1.6 HDi 115ch

  1. Remove the engine plate Locate the fuel filter Locate the fuel filter

    • Remove the engine plate

    • Locate the fuel filter

  2. Disconnect the hoses Disconnect the hoses

    • Disconnect the hoses

  3. Using the 24 mm flat spanner, unscrew the diesel filter. Remove the filter cover. Remove the filter cover.

    • Using the 24 mm flat spanner, unscrew the diesel filter.

    • Remove the filter cover.

  5. Check that the filter matches the old one Check that the filter matches the old one

    • Check that the filter matches the old one

  6. Install the new filter Install the new filter Install the new filter

    • Install the new filter

  7. Replace the filter gasket Replace the filter gasket

    • Replace the filter gasket

  8. Replace the cover Screw it using the 24 key Screw it using the 24 key

    • Replace the cover

    • Screw it using the 24 key

  9. Connect the filter hoses Replace the engine plate Replace the engine plate

    • Connect the filter hoses

    • Replace the engine plate

Finish Line

13 other people completed this guide.

Author

with 2 other contributors

dlychar

Member since: 10/9/17

70 Guides authored

11 Comments

2008 ……phase 1 or 2?

xavieroeuvrard - Resolved on Release Reply

Why doesn't OSCAR HO explain the removal of hoses and electrical sockets???

Jacky

jacky leydier - Resolved on Release Reply

I had a problem because the engine cover bracket touches the electrical outlet plug and I broke them when disassembling, to avoid this disassemble the bracket with a flat wrench. But thanks for the tutorial I think I managed and I saved 60 euros of labor.

Anthony POUZET - Resolved on Release Reply

You have to lift the white central part and press on the sides of this same white piece

Jean Francois DAVID - Resolved on Release Reply

Hello, do you have to empty the diesel into the tank?

If so, how should it be done?

karim TAHTAH - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 3

All Time: 33,142

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.