Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Change fuel filter Fiat Doblo 1.3 Multijet

Written By: charly bontemps (and one other contributor)
  • Comments: 5
  • Favorites: 0
  • Completions: 3

Difficulty

Moderate

Steps

9

Time Required

00:20:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

  1. Open the hood The fuel filter is located here

    • Open the hood

    • The fuel filter is located here

    Edit

  2. Pull the connector retaining tab Lift the connector upwards to disconnect it Lift the connector upwards to disconnect it

    • Pull the connector retaining tab

    • Lift the connector upwards to disconnect it

    Edit

  3. Unclip the filter hoses Unclip the filter hoses Unclip the filter hoses

    • Unclip the filter hoses

    Edit

  4. Using a Torx T25 screwdriver, unscrew the 6 T25 screws on the filter Pull the cover up to access the cartridge Pull the cover up to access the cartridge

    • Using a Torx T25 screwdriver, unscrew the 6 T25 screws on the filter

    • Pull the cover up to access the cartridge

    Edit

  5. Pull the cartridge to disconnect it from the filter cover Pull the cartridge to disconnect it from the filter cover

    • Pull the cartridge to disconnect it from the filter cover

    Edit

  6. Compare the two filters

    • Compare the two filters

    Edit

  7. Install the new cartridge, taking care to insert the tip into its location. Install the cartridge by inserting it into the cover Install the cartridge by inserting it into the cover

    • Install the new cartridge, taking care to insert the tip into its location.

    • Install the cartridge by inserting it into the cover

    Edit

  8. Before reinstalling the new cartridge, empty and clean the fuel filter bowl. Install the new cartridge Screw in the 6 T25 screws using the screwdriver

    • Before reinstalling the new cartridge, empty and clean the fuel filter bowl.

    • Install the new cartridge

    • Screw in the 6 T25 screws using the screwdriver

    Edit

  9. Reconnect the fuel lines Reconnect the filter connector To re-prime the fuel filter, cycle the ignition 5 to 6 times before starting.

    • Reconnect the fuel lines

    • Reconnect the filter connector

    • To re-prime the fuel filter, cycle the ignition 5 to 6 times before starting.

    • Close the hood

    Edit
Finish Line

3 other people completed this guide.

Author

with 1 other contributor

charly bontemps

Member since: 11/22/2016

13,501 Reputation

49 Guides authored

5 Comments

Méthode simple et explicite. Merci

rouxma - Reply

Hello and thank you for the tutorial, what is this connector on the filter?

fangio38 - Reply

Hello This is the power supply for the fuel pump which is used to prime the 12 volt circuit and the sensor for the indicator for the presence of water in the filter. Regards

cnvalphonse -

You also need to remove the aluminum filter jar (easy: 10mm wrench). That way you can clean it properly!

Henri Bruch - Reply

Thank you very much for this valuable help

david masson - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 50

Past 30 Days: 168

All Time: 13,110

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.