Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Change brake disc and pads

Written By: ozanbacak19 (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

Flags

2

En cours

En cours

Ce tutoriel est en cours de création. Revenez de temps en temps pour voir les modifications.

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

  1. Raise the vehicle and place a jack stand on it. Remove the wheel Remove the wheel

    • Raise the vehicle and place a jack stand on it.

    • Remove the wheel

    Edit

  2. Push the piston back with a flat screwdriver Red arrow: hold the sliding nut with a 17 flat wrench. Green arrow: unscrew the screw with a 13 flat wrench.

    • Push the piston back with a flat screwdriver

    • Red arrow: hold the sliding nut with a 17 flat wrench.

    • Green arrow: unscrew the screw with a 13 flat wrench.

    • Raise

    Edit

  3. Remove the brake pads Unscrew the caliper Unscrew the disk

    • Remove the brake pads

    • Unscrew the caliper

    • Unscrew the disk

    Edit

    • Clean the hub with a wire brush

    • Compare old and new disk

    • Put the disc back

    Edit

  5. Screw the caliper back on clean the pad location using a wire brush

    • Screw the caliper back on

    • clean the pad location using a wire brush

    Edit

  6. Reinstall the pads Replace the caliper

    • Reinstall the pads

    • Replace the caliper

    Edit

    • Tighten the caliper mounting screws

    Edit

  8. Put the screws back in by hand

    • Put the screws back in by hand

    • Lower the vehicle

    • Tighten with torque wrench

    Edit
Finish Line

Author

with 1 other contributor

ozanbacak19

Member since: 11/05/2020

28 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 67

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.