Difficulty
Easy
Steps
5
Time Required
00:30:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
This tutorial is made on a Mercedes class c 203 220 CDI
Tools
Parts
-
-
Pull the red lever located under the steering wheel. The hood will lift slightly.
-
Pull the black lever located at the front of the hood to open it completely.
-
-
-
Locate the oil cap.
-
Please note: The position may vary from one engine to another but the principle will always be the same.
-
Unscrew the oil cap a quarter turn, then remove it.
-
Unclip the engine cover by lifting it firmly.
-
Screw the oil cap back on.
-
-
-
Locate the air filter cover retaining tabs
-
Using a fairly large flat-blade screwdriver, unclip the tabs holding the air filter cap in place.
-
Remove the air filter cover.
-
-
-
Pull the air filter toward the rear of the vehicle to remove it from its location.
-
Install the new filter.
-
Reposition the air filter cover. Using the flat screwdriver, replace the retaining tabs.
-
-
-
Unscrew the oil cap, it lifts off after turning it a quarter turn.
-
Clip the engine cover by pressing it firmly.
-
Screw the oil cap back on.
-
Close the hood and the operation is complete.
-
Cancel: I did not complete this guide.
5 other people completed this guide.
