Difficulty
Very easy
Steps
3
Time Required
00:20:00
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Here is a tutorial explaining how to proceed for the replacement of the battery on Fiat Tipo 2 1.4l 95cv.
It is imperative, before disconnecting the battery, to allow at least 10 minutes to elapse after switching off the ignition in order to give the vehicle time to go into sleep mode.
-
-
Open the hood to locate the battery (on the right here).
-
note that the positive terminal is on the right on the battery, this will help when ordering the new one -
unclip the cover located on the + terminal by pressing on the lugs.
-
positive terminal marking
-
negative terminal marking
-
-
-
For the negative terminal, no tools are required, simply unclip the system, which will release it and thus release the plug.
-
Unscrew the positive terminal using a 10 wrench, and pull upwards to extract the terminal.
-
Finally, unscrew the 13 screw on the left, which will release the battery retaining strap and finally allow it to be removed.
-
To avoid causing a short circuit with a tool on the battery terminals, it is imperative to start the disconnection with the (-) minus terminal then the (+) plus terminal on this vehicle
-
-
-
reposition the new battery, lightly greasing the terminals
-
Make sure that the battery is placed well behind the side support so that it is stabilized.
-
Pass the retaining strap inside the handle of the new battery and screw it in as originally with its 13 screw.
-
Connect the terminals starting with the positive and then the negative and proceed to tighten the terminals and reassemble the positive terminal cover.
-
''the amperage of the new battery must be equivalent to the old one, here a battery of 52AH''
-
2 Comments
Hello, is there a risk of data loss when replacing the battery because on some models you have to put a booster in parallel?
To avoid immobilization of the vehicle
I have a 2017 SW type
Good morning,
This relay battery process is particularly necessary for vehicles with start and stop.
In my case, my vehicle did not have this option, so the battery was changed as on a conventional vehicle.
