-
-
Locate the air filter box. The air filter cartridge is inside
-
Remove the spring clamp between the intake air duct and the air filter housing using a pair of pliers.
-
Remove the spring clamp between the air guide duct and the air filter housing using a pair of multi-grip pliers.
-
Remove the hose from the check valve
-
-
-
Remove the hose from its mounting bracket
-
Remove the Torx screw using a T30 Torx screwdriver
-
Lift hard to separate the air filter housing
-
Disconnect the intake air duct and the guide sheath from the air filter housing
-
-
-
Turn the air filter housing over and unscrew the 9 screws on the housing using a TORX T20 screwdriver.
-
Remove the air filter housing cover
-
Remove the air filter
-
Clean the inside of the air filter housing
-
-
-
Replace the air filter
-
Clean the 2 sheaths of fatty substances using a cloth
-
-
-
Go back in reverse order
-
Mount the air filter box on the engine by pushing it onto the 2 mounting brackets
-
Connect the intake air duct sheath and the air guide sheath to the air filter housing
-
Replace the intake air duct clamp, taking care to place it in the groove
-
Replace the air guide duct collar, taking care to place it in the groove
-
Screw and tighten the TORX T30 screw
-
Replace the non-return valve hose
-
Replace the hose on its mounting bracket
-
Cancel: I did not complete this guide.
One other person completed this guide.